Function – AT Surgical https://atsmanufacturing.github.io/oldat/ Manufacturers of Orthopedic Braces and Supports since 1975 Fri, 03 Feb 2023 17:26:58 +0000 en-US hourly 1 https://wordpress.org/?v=6.1.1 https://atsmanufacturing.github.io/oldat/wp-content/uploads/2018/01/cropped-tiny-doc-32x32.jpg Function – AT Surgical https://atsmanufacturing.github.io/oldat/ 32 32 140757076 Tranz* Forms FTM Chest Binder MkIV https://atsmanufacturing.github.io/oldat/product/ftm-chest-binder/ https://atsmanufacturing.github.io/oldat/product/ftm-chest-binder/#respond Tue, 10 Jul 2018 14:46:07 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=6278 The MkIV is the most competitive option for transmasculine folx. Designed & iterated upon by an FTM during his pre-op days, this is the fourth version of the product.

We’ve replaced the previous material with a higher spandex-to-nylon ratio without sacrificing the compression of the original design. This medical grade Lycra® is softer to the touch than previous iterations for a longer wear-time.

For the best binder for your body, please make sure to follow the sizing instructions before ordering.

The post Tranz* Forms FTM Chest Binder MkIV appeared first on AT Surgical.

]]>

The post Tranz* Forms FTM Chest Binder MkIV appeared first on AT Surgical.

]]> https://atsmanufacturing.github.io/oldat/product/ftm-chest-binder/feed/ 0 6278 Shin Protector Sleeve https://atsmanufacturing.github.io/oldat/product/shin-protector-sleeve/ https://atsmanufacturing.github.io/oldat/product/shin-protector-sleeve/#respond Wed, 30 May 2018 13:33:38 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=6047
  • Sleeve with 3 mm gel polymer soft cushion pads moulded at the shin, protecting it from abrasion, friction, and pinching when practicing sports
  • Used under the socks with the pad either in contact to the skin or facing the sock
  • Washable and reusable

    • The post Shin Protector Sleeve appeared first on AT Surgical.

    ]]>     The post Shin Protector Sleeve appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/shin-protector-sleeve/feed/ 0 6047     Scratch Protection Sleeve https://atsmanufacturing.github.io/oldat/product/scratch-protection-sleeve/ https://atsmanufacturing.github.io/oldat/product/scratch-protection-sleeve/#respond Thu, 22 Feb 2018 21:28:38 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5289 This sleeve is designed for medical practitioners caring for patients with a history of violence. Double layering protects the wearer from scratches targeting the forearms, allowing them to attend to their patient free of harm.

    The post Scratch Protection Sleeve appeared first on AT Surgical.

    ]]>
  • Formfitting design keeps the sleeves firmly in place
  • Double layers protect from biting & scratching
  • Available for the forearm or forearm and hand for additional protection

    • The post Scratch Protection Sleeve appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/scratch-protection-sleeve/feed/ 0 5289     Adjustable Compression Legging https://atsmanufacturing.github.io/oldat/product/adjustable-compression-legging/ https://atsmanufacturing.github.io/oldat/product/adjustable-compression-legging/#respond Thu, 22 Feb 2018 20:33:08 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5333 Tired of finding the right fit for a compression stocking?

    Look no further! Our Adjustable Compression Legging removes the difficulty of putting on a stocking with it's adjustable Velcro® system. Gradient counter-pressure offers better control, & the nylon/elastic material is washable.

    The post Adjustable Compression Legging appeared first on AT Surgical.

    ]]>     The post Adjustable Compression Legging appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/adjustable-compression-legging/feed/ 0 5333     Back Brace Body Jacket https://atsmanufacturing.github.io/oldat/product/back-brace-body-jacket/ https://atsmanufacturing.github.io/oldat/product/back-brace-body-jacket/#respond Thu, 08 Feb 2018 21:19:58 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5263 Intended for folks with arthritis or instability of the lumbar spine. The additional support offers relief to lower back pain while limiting flexion, stretching, and bending. Assists in recovery with spondylolysis, herniated or bulging disc, lumbar fracture management, post-operative stabilization, and spinal stenosis.

    The post Back Brace Body Jacket appeared first on AT Surgical.

    ]]>
  • Full support for thoracic to lumbar region
  • Main Velcro® closure with three additional belts for optimal adjustment
  • Special poly insert for firm support
  • Keystone pad gives extra lumbar support

    • Waist Size
    28″ – 32″ Small
    32″ – 36″ Medium
    36″ – 40″ Large
    40″ – 44″ Extra Large
    44″ – 48″ 2XL

    The post Back Brace Body Jacket appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/back-brace-body-jacket/feed/ 0 5263     Multi-Fit Wrist Brace https://atsmanufacturing.github.io/oldat/product/multi-fit-wrist-brace/ https://atsmanufacturing.github.io/oldat/product/multi-fit-wrist-brace/#respond Thu, 08 Feb 2018 15:20:08 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5252 The Multi-Fit Wrist Brace is a 9" inch protective sleeve with a flexible stay. An array of Velcro® straps allow for total adjustment, making it the perfect fit for any size.

    The post Multi-Fit Wrist Brace appeared first on AT Surgical.

    ]]>

    Wrist Circumference Brace Size
    5.5″ – 6.5″ Small
    6.5″ – 7.5″ Medium
    7.5″ – 8.5″ Large
    8.5″ – 9.5″ Extra Large

    The post Multi-Fit Wrist Brace appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/multi-fit-wrist-brace/feed/ 0 5252     Full Wrist Brace with Double Strap https://atsmanufacturing.github.io/oldat/product/full-wrist-brace-with-double-strap/ https://atsmanufacturing.github.io/oldat/product/full-wrist-brace-with-double-strap/#respond Wed, 07 Feb 2018 20:58:25 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5238 For that injured wrist that needs the EXTRA extra support.

    The post Full Wrist Brace with Double Strap appeared first on AT Surgical.

    ]]>

    Wrist Circumference Brace Size
    5.5″ – 6.5″ Small
    6.5″ – 7.5″ Medium
    7.5″ – 8.5″ Large
    8.5″ – 9.5″ Extra Large

    The post Full Wrist Brace with Double Strap appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/full-wrist-brace-with-double-strap/feed/ 0 5238     5″ Protective Wrist Brace https://atsmanufacturing.github.io/oldat/product/protective-wrist-brace/ https://atsmanufacturing.github.io/oldat/product/protective-wrist-brace/#comments Wed, 07 Feb 2018 20:28:14 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5226 Double locking velcro® stays secure the wrist, while padding protects it from further injury.

    The post 5″ Protective Wrist Brace appeared first on AT Surgical.

    ]]>      

    Wrist Circumference Brace Size
    5.5″ – 6.5″ Small
    6.5″ – 7.5″ Medium
    7.5″ – 8.5″ Large
    8.5″ – 9.5″ Extra Large

     

    The post 5″ Protective Wrist Brace appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/protective-wrist-brace/feed/ 1 5226     Neoprene Wrist Support https://atsmanufacturing.github.io/oldat/product/neoprene-wrist-support/ https://atsmanufacturing.github.io/oldat/product/neoprene-wrist-support/#respond Wed, 07 Feb 2018 19:37:12 +0000 https://atsmanufacturing.github.io/oldat/?post_type=product#038;p=5213 This wrist support brace is made of Neoprene, a flexible material that provides protection to injured wrists.

    The post Neoprene Wrist Support appeared first on AT Surgical.

    ]]>
  • Aids in the healing of injured wrists
  • Made with powerful elastic for adjustable support
  • Easily adjusted for maximum convenience

    • Wrist Circumference Brace Size
    4.5″ – 5.5″ Extra Small
    5.5″ – 6.5″ Small
    6.5″ – 7.5″ Medium
    7.5″ – 8.5″ Large
    8.5″ – 9.5″ Extra Large

    The post Neoprene Wrist Support appeared first on AT Surgical.

    ]]>     https://atsmanufacturing.github.io/oldat/product/neoprene-wrist-support/feed/ 0 5213